| | | cold rolled steel coils | cold rolled steel sheet |
| | Product | Cold Rolled Flat Products
Coils & Sheets & Pre-Painted Sheets | | Field of Application | Automobile Industry, White Goods, Home Applicances, Oil & Air filters, semi product for coating with enamel or zinc, construction & building sector, air-conditioning, furniture, radiators, tubes, profiles, mechanical construction, shelving, containers, drums | Production Standards
& Steel Grades | EN 10130 DC 01/ 02 DIN 1623 ST. 12.03
EN 10209 DC 01
EN 10209 DC 04
JIS G 3141 SPCC / SPCD/ SPCE
ASTM A 1008/ A 1008M
ASTM A 619/ DQ – ASTM A 620 / DQ SK
Other grades are available upon request | | Sizes | CR Coils CR Sheet CR Strips | Thickness: 0.13 – 3.00 mm
Width: 600 – 1,500 mm
Coil Weight: max. 27 tons (varies with thickness) Thickness: 0.13 – 2,00 mm
Width: 600 – 1,500 mm
Length: min. 500 – max. 6000 mm
Packing Weight: 2 – 5 tons Thickness: 0.13 – 3.0 mm
Width: up to 499 mm
Coil Weight: max. 10 tons | | Marking | Information tags on coils or packages | | Packing | Will be wrapped in waterproof paper & fastened with steel protectors on the edges.
Waterproof paper or other special wrapping material is applicable upon request. | | Mill Certificates | Issued upon request according to EN 10204
2.2:3.1 (3.2 available on special requests) |
This cold-rolled carbon-magnesium steel offers a guaranteed minimum level of mechanical characteristics.
It is suitable for many applications in multiple sectors as well as offering a good supply to our distributors and service centres.
Available as sheet or coiled steel in thicknesses from 0.50mm to 3mm and widths from 60cm to 207cm.
Joined by welding, crimping, or riveting.
Options: oiling, can be protected using a thin dry organic film (Easyfilm®).
High strength cold-rolled steel with low carbon content and micro-alloyed with strong mechanical characteristics that meet the requirements of the Pr EN 10268/2004 standard.
It is particularly suitable for mechanised welding of structural pieces due to its weldability improved by its low carbon content, and to roll forming with regard to consistency and reliability of its mechanical characteristics.
It is available as sheet or coiled steel in thicknesses from 0.30mm to 3.15mm and widths from 60cm to 183cm.
It is assembled by welding, riveting and adhesive bonding.
Options: Surface appearance, surface finishing, oiling.
Cold-rolled steel as defined in the EN 10130/98 standard, with guaranteed maximum mechanical characteristics and guaranteed minimum ductility and formability.
It is suited to formation by bending or drawing, which enables complex parts to be produced in good repeatable conditions and intended for indoor use.
Available as sheet or coiled steel in thicknesses from 0.40mm to 4mm and widths from 60cm to 207cm.
It is joined by welding, crimping, clinching, or adhesive bonding.
Options: Surface appearance, Surface finish, oiling.
Properties
This is a range of cold rolled non-alloyed mild steel grades with guaranteed maximum yield and tensile strength, guaranteed minimum ductility (elongation at fracture) and good formability (n and r values). These grades comply with the requirements of the EN 10130:2006 standard and are obtained after either batch or continuous annealing.
Advantages
These steel grades have excellent formability, which facilitates cold forming operations, and are ideal for deep drawing.
Our range of steels for cold forming offer excellent forming performance, due to the low scattering of their chemical composition and their mechanical properties, which guarantees processing consistency.
|
